For brazing, forging, melting, annealing/softening, and heating larger workpieces

For brazing, melting, annealing/softening, and hardening workpieces (suited for objects with relatively shallower surface hardening)

For brazing, melting, annealing/softening, and hardening workpieces (suited for objects with relatively deeper surface hardening)

For brazing, melting, annealing/softening, and hardening workpieces (suited for objects with relatively deeper surface hardening)

For brazing, melting, annealing/softening, and hardening workpieces (suited for objects with relatively deeper surface hardening)

For welding and hardening workpieces (suited for objects with relatively shallow surface hardening)

Specially for rapid, partial heating of intricate workpieces; to be installed as part of automated production equipment. Power-cube 32/900

Specially for rapid, partial heating of intricate workpieces; to be installed as part of automated production equipment

Specially for rapid, partial heating of intricate workpieces; to be installed as part of automated production equipment

Specially for rapid, partial heating of intricate workpieces; to be installed as part of automated production equipment. Power-cube 32/1800

‧The dimension is 60x125x105mm (50x80x85mm)。 ‧Can be placed in any position and movement。

* 搭配(再)超高週波加熱機使用。 * 保溫、時間、保護氣體、功率設定及溫度顯示。 * 可偵測線圈之過長，過短。 * 自我診測系統。 * 可由外部遙控調整功率。 * 可和多種自動化系統聯結，如RS-232。

* 可加配自動送焊線系統。 * 搭配(再)超高週波加熱機使用。 * 保溫、時間、保護氣體、功率設定及溫度顯示。 * 可偵測線圈之過長，過短。 * 自我診測系統。 * 可由外部遙控調整功率。 * 可和多種自動化系統聯結，如RS-232。

It should be equipped with Master Controller.Can feeding the wire in precision position and length.

Only the high efficiency infrared temperature controller with sensors can against so fast heating up high frequency heater. The sensors are available in three models. (150-600. 400-900.600-1200C).

In order to anti oxidizing or protection request, it also can be equipped with gas protection during heating. It should be equip with Power Contoller (or Master Controller). The gas can be nitrogen,argon, or others.

The generator, and especially the induction coil needs the water to cooling.It is depending on power and working time choose the suitable cooler (No.1.2.3). The cooler is especial design for inductor heater, because water,s pressure,quantity, quality and temperature are cared.

‧此機乃以電磁效應原理，非接觸性之感應加熱,可穿透非金屬容器對任何鐵金屬（鐵、鋁、銅、金等）加熱。 ‧採用晶體技術及極小而堅固之機體設計。 ‧由微電腦自我診斷控制，確保於作業中能自動調適最穩定的輸出功率及最適宜的頻率。 ‧在最高效率下，可持續性作業；比傳統式更省電，無真空球、無耗材，待機時不耗電，不干擾通訊，須水冷卻。 ‧適合配備於自動化生產設備，亦可選擇性配備一或兩個感應線圈頭，如用於焊接,熔煉,回火軟化，淬火硬化熱處理(硬化層深者使用)。 ‧由於操作簡易，耐用、亦適用於手持作業，加熱溫度依加熱物件體積及散熱平衡與否，可達1000℃以上，甚至燒焚，本機備有二段式輸出功率調整及時間控制，可使用加熱物件恒溫，手動、自動共用。

‧此機乃以電磁效應原理，非接觸性之感應加熱,可穿透非金屬容器對任何鐵金屬（鐵、鋁、銅、金等）加熱。 ‧採用晶體技術及極小而堅固之機體設計。 ‧由微電腦自我診斷控制，確保於作業中能自動調適最穩定的輸出功率及最適宜的頻率。 ‧在最高效率下，可持續性作業；比傳統式更省電，無真空球、無耗材，待機時不耗電，不干擾通訊，須水冷卻。 ‧適合配備於自動化生產設備，亦可選擇性配備一或兩個感應線圈頭，如用於焊接,熔煉,回火軟化，淬火硬化熱處理(硬化層深者使用)。 ‧由於操作簡易，耐用、亦適用於手持作業，加熱溫度依加熱物件體積及散熱平衡與否，可達1000℃以上，甚至燒焚，本機備有二段式輸出功率調整及時間控制，可使用加熱物件恒溫，手動、自動共用。

‧可顯示及更換頻率。 ‧採用晶體技術及極小而堅固之機體設計。 ‧由微電腦自我診斷控制，確保於作業中能自動調適最穩定的輸出功率及最適宜的頻率。 ‧在最高效率下，可持續性作業；比傳統式更省電，無真空球、無耗材，待機時不耗電，不干擾通訊，須水冷卻。 ‧適合配備於自動化生產設備，亦可選擇性配備一或兩個感應線圈頭，如用於焊接,熔煉,回火軟化，淬火硬化熱處理(硬化層深者使用)。 ‧由於操作簡易，耐用、亦適用於手持作業，加熱溫度依加熱物件體積及散熱平衡與否，可達1000℃以上，甚至燒焚，本機備有二段式輸出功率調整及時間控制，可使用加熱物件恆溫，手動、自動共用。

1 * All functions are microcomputer controlled: consistency, high reliability and ease of operation 2 * Extremely quiet operation 3 * Digital power adjustment and indicator 4 * High efficiency using a solid-state generator 5 * Self-diagnostics including fault and mis-operational voice messages 6 * Stainless steel construction 7 * Control of the temperature (option) with thermocouple or optical sensor 8 * Gas blow pipe to prevent oxidisation

1 * All functions are microcomputer controlled: consistency, high reliability and ease of operation 2 * Extremely quiet operation 3 * Digital power adjustment and indicator 4 * High efficiency using a solid-state generator 5 * Self-diagnostics including fault and mis-operational voice messages 6 * Stainless steel construction 7 * Control of the temperature (option) with thermocouple or optical sensor 8 * Gas blow pipe to prevent oxidisation

* 液性焊劑以各類極細顆粒的金屬粉末（金、銀、銅、錫、鋁、鈦、鋅）或合金成份，混合各種依加熱能源不同之清潔助焊劑而成。其適用範圍如金飾、銀飾、銅飾、白金及各種不同金屬精密工業定點，定量之特性而後加溫，即焊接完成。

Power Supply：3Ø 400V ,50/60Hz Size：710 x 550 x 1570mm Weight：300kg Frequency：25 kHz ~100 kHz Absorbed Power：25kw/ 50kw/ 75kw/ 100kw Efficiencies：> 96% Touch-screen Interface A fully automatic process for selecting the best Generator parameters,maximizing conversion efficiency at each set point power.〈AUTO LEARN〉 Thermal profile management and monitoring Integrated Web server and Data Log System